Wire Chimney Cleaning Brush with 5/16" Fitting and 15 Rods, 6 Inch Round Steel Chimney Cleaning Brush, 6 Inch Nylon Brush,16 Inch Long Rods for Fireplace Duct Or Other Streight Duct

Note! 1.During use, please wear protective clothing, a mask, and goggles to protect yourself.2. Because this product is measured and produced manually. There may be errors, and the size error will not be greater than 2cm. Please understand! 3. During the cleaning process, when you find that the length of the rod is too long, please remove the unnecessary part of the rod in time, otherwise the long rod may cause several rods to be entangled! 【Warning!】 1.Only rotate the brush/rod assembly clockwise. The opposite direction may cause the brush head or rod to separate in the pipe. Never force the brush/rod assembly through the pipe! If it gets stuck, pull the assembly a few inches away from the narrow area (still rotating clockwise), and then push it forward slowly.2.Do not clean bent duct.

• Composition:It consists of 15 Pcs 16.1 Inch long hard rods,1Pcs 6 Inch Round Steel Chimney Cleaning Brush, 1Pcs 1Pcs 6 Inch brush , 1Pcs hexagonal connecting rod , 1Pcs cloth bag and 2Pcs tape. The rods here cannot be bent.The screw thread is 5/16.