Bobrick 9221.MBLK Fino Surface-Mounted Seat Cover Dispenser, Matte Black

Part of the Fino Collection, this seat cover dispenser is made from premium Type 304 stainless steel and finished in a sleek, powder-coated matte black. Its seam-welded construction, crisp edges, and hidden fasteners give the unit a clean, modern look suited for high-end restroom designs. The dispenser holds 250 single-fold or half-fold toilet seat covers (one standard box) and is serviced from the bottom. Be sure to maintain at least 5″ (125 mm) of clearance beneath the unit to allow for proper bottom-loading refills.

Dimensions:

• Width: 15-13/16″ (400 mm)
• Height: 11″ (280 mm)
• Depth: 2″ (50 mm)
• Material: Type 304 stainless steel, 18-gauge (1.2 mm)

Product Specs:

• Finish: Satin-Finish Stainless Steel
• Mounting: Surface Mounted
• Capacity: 250
• Accessibility: ADA Compliant

MATERIALS:

18-8, type-304, 18-gauge (1.2mm) stainless steel with satin or matte black finish, as specified. Seam-welded construction with opening. OPERATION: Dispenses single- or half-fold paper toilet seat covers from opening. Dispenser fills from bottom through concealed opening. Capacity: 250 toilet seat covers or one box. 5-Year Limited Warranty — Bobrick extends a limited 5-year warranty from the date of purchase on all parts for model B-9221. This warranty is limited to the repair or exchange of defective parts at the option of Bobrick and is only extended to the original owner of the installed unit against defects in factory workmanship or material under normal use and service.

INSTALLATION:

Mount unit on wall or toilet partition with two flat-head screws, not furnished by manufacturer, at points indicated by an S. For plaster or dry wall construction, provide concealed backing that complies with local building codes, then secure unit with flathead screws not furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with screws, not furnished, or provide 1/8'' (3mm) toggle bolts or expansion bolts. Note: Provide a 5'' (125mm) minimum clearance from bottom of dispenser to top of any horizontal projection to provide room for filling dispenser from bottom. 

SPECIFICATION:

Surface-mounted toilet seat cover dispenser shall be type-304, 18-gauge (1.2mm) stainless steel with all welded construction; exposed surfaces shall have satin or matte black finish, as specified. Dispenser shall have a concealed opening in bottom for filling. Capacity shall be 250 paper toilet seat covers or one box.